[MathJax off]

87 More about Stabilizer Chains

This chapter contains some rather technical complements to the material handled in the chapters 42 and 43.

87.1 Generalized Conjugation Technique

The command ConjugateGroup( G, p ) (see ConjugateGroup (39.2-6)) for a permutation group G with stabilizer chain equips its result also with a stabilizer chain, namely with the chain of G conjugate by p. Conjugating a stabilizer chain by a permutation p means replacing all the points which appear in the orbit components by their images under p and replacing every permutation g which appears in a labels or transversal component by its conjugate \(g^p\). The conjugate \(g^p\) acts on the mapped points exactly as g did on the original points, i.e., \((pnt.p). g^p = (pnt.g).p\). Since the entries in the translabels components are integers pointing to positions of the labels list, the translabels lists just have to be permuted by p for the conjugated stabilizer. Then generators is reconstructed as labels{ genlabels } and transversal{ orbit } as labels{ translabels{ orbit } }.

This conjugation technique can be generalized. Instead of mapping points and permutations under the same permutation p, it is sometimes desirable (e.g., in the context of permutation group homomorphisms) to map the points with an arbitrary mapping \(map\) and the permutations with a homomorphism \(hom\) such that the compatibility of the actions is still valid: \(map(pnt).hom(g) = map(pnt.g)\). (Of course the ordinary conjugation is a special case of this, with \(map(pnt) = pnt.p\) and \(hom(g) = g^p\).)

In the generalized case, the conjugated chain need not be a stabilizer chain for the image of \(hom\), since the preimage of the stabilizer of \(map(b)\) (where \(b\) is a base point) need not fix \(b\), but only fixes the preimage \(map^{{-1}}( map(b) )\) setwise. Therefore the method can be applied only to one level and the next stabilizer must be computed explicitly. But if \(map\) is injective, we have \(map(b).hom(g) = map(b)\) if and only if \(b.g = b\), and if this holds, then \(g = w(g_1, \ldots, g_n)\) is a word in the generators \(g_1, \ldots, g_n\) of the stabilizer of \(b\) and \(hom(g) =^* w( hom(g_1), \ldots, hom(g_n) )\) is in the conjugated stabilizer. If, more generally, \(hom\) is a right inverse to a homomorphism \(\varphi\) (i.e., \(\varphi(hom(g)) = g\) for all \(g\)), equality \(*\) holds modulo the kernel of \(\varphi\); in this case the conjugated chain can be made into a real stabilizer chain by extending each level with the generators of the kernel and appending a proper stabilizer chain of the kernel at the end. These special cases will occur in the algorithms for permutation group homomorphisms (see 40).

To conjugate the points (i.e., orbit) and permutations (i.e., labels) of the Schreier tree, a loop is set up over the orbit list constructed during the orbit algorithm, and for each vertex \(b\) with unique edge \(a(l)b\) ending at \(b\), the label \(l\) is mapped with \(hom\) and \(b\) with \(map\). We assume that the orbit list was built w.r.t. a certain ordering \(<\) of the labels, where \(l' < l\) means that every point in the orbit was mapped with \(l'\) before it was mapped with \(l\). This shape of the orbit list is guaranteed if the Schreier tree is extended only by AddGeneratorsExtendSchreierTree (43.11-10), and it is then also guaranteed for the conjugated Schreier tree. (The ordering of the labels cannot be read from the Schreier tree, however.)

In the generalized case, it can happen that the edge \(a(l)b\) bears a label \(l\) whose image is old, i.e., equal to the image of an earlier label \(l' < l\). Because of the compatibility of the actions we then have \(map(b) = map(a).hom(l)^{{-1}} = map(a).hom(l')^{{-1}} = map(a{{l'}}^{{-1}})\), so \(map(b)\) is already equal to the image of the vertex \(a{{l'}}^{{-1}}\). This vertex must have been encountered before \(b = al^{{-1}}\) because \(l' < l\). We conclude that the image of a label can be old only if the vertex at the end of the corresponding edge has an old image, too, but then it need not be conjugated at all. A similar remark applies to labels which map under \(hom\) to the identity.

87.2 The General Backtrack Algorithm with Ordered Partitions

Section 43.12 describes the basic functions for a backtrack search. The purpose of this section is to document how the general backtrack algorithm is implemented in GAP and which parts you have to modify if you want to write your own backtrack routines.

87.2-1 Internal representation of ordered partitions

GAP represents an ordered partition as a record with the following components.

points

a list of all points contained in the partition, such that the points of each cell from lie consecutively,

cellno

a list whose ith entry is the number of the cell which contains the point i,

firsts

a list such that points[firsts[j]] is the first point in points which is in cell j,

lengths

a list of the cell lengths.

Some of the information is redundant, e.g., the lengths could also be read off the firsts list, but since this need not be increasing, it would require some searching. Similar for cellno, which could be replaced by a systematic search of points, keeping track of what cell is currently being traversed. With the above components, the mth cell of a partition P is expressed as P.points{ [ P.firsts[m] .. P.firsts[m] + P.lengths[m] - 1 ] }. The most important operations, however, to be performed upon P are the splitting of a cell and the reuniting of the two parts. Following the strategy of J. Leon, this is done as follows:

(1)

The points which make up the cell that is to be split are sorted so that the ones that remain inside occupy positions [ P.firsts[m] .. last ] in the list P.points (for a suitable value of last).

(2)

The points at positions [ last + 1 .. P.firsts[m] + P.lengths[m] - 1 ] will form the additional cell. For this new cell requires additional entries are added to the lists P.firsts (namely, last+1) and P.lengths (namely, P.firsts[m] + P.lengths[m] - last - 1).

(3)

The entries of the sublist P.cellno{ [ last+1 .. P.firsts[m] + P.lengths[m]-1 ] } must be set to the number of the new cell.

(4)

The entry P.lengths[m] must be reduced to last - P.firsts[m] + 1.

Then reuniting the two cells requires only the reversal of steps 2 to 4 above. The list P.points need not be rearranged.

87.2-2 Functions for setting up an R-base

This subsection explains some GAP functions which are local to the library file lib/stbcbckt.gi which contains the code for backtracking in permutation groups. They are mentioned here because you might find them helpful when you want to implement you own backtracking function based on the partition concept. An important argument to most of the functions is the R-base \(R\), which you should regard as a black box. We will tell you how to set it up, how to maintain it and where to pass it as argument, but it is not necessary for you to know its internal representation. However, if you insist to learn the whole story: Here are the record components from which an R-base is made up:

domain

the set \(\Omega\) on which the group \(G\) operates

base

the sequence \((a_1, \ldots, a_r)\) of base points

partition

an ordered partition, initially \(\Pi_0\), this will be refined to \(\Pi_1, \ldots, \Pi_r\) during the backtrack algorithm

where

a list such that \(a_i\) lies in cell number where\([i]\) of \(\Pi_i\)

rfm

a list whose \(i\)th entry is a list of refinements which take \(\Sigma_i\) to \(\Sigma_{{i+1}}\); the structure of a refinement is described below

chain

a (copy of a) stabilizer chain for \(G\) (not if \(G\) is a symmetric group)

fix

only if \(G\) is a symmetric group: a list whose \(i\) entry contains Fixcells( \(\Pi_i\) )

level

initially equal to chain, this will be changed to chains for the stabilizers \(G_{{a_1 \ldots a_i}}\) for \(i = 1, \ldots, r\) during the backtrack algorithm; if \(G\) is a symmetric group, only the number of moved points is stored for each stabilizer

lev

a list whose \(i\)th entry remembers the level entry for \(G_{{a_1 \ldots a_{{i-1}}}}\)

level2, lev2

a similar construction for a second group (used in intersection calculations), false otherwise. This second group \(H\) activated if the R-base is constructed as EmptyRBase( \([ G, H ], \Omega, \Pi_0\) ) (if \(G = H\), GAP sets level2 = true instead).

nextLevel

this is described below

As our guiding example, we present code for the function Centralizer (35.4-4) which calculates the centralizer of an element \(g\) in the group \(G\). (The real code is more general and has a few more subtleties.)

Pi_0 := TrivialPartition( omega );
R := EmptyRBase( G, omega, Pi_0 );
R.nextLevel := function( Pi, rbase )
local  fix, p, q, where;
NextRBasePoint( Pi, rbase );
fix := Fixcells( Pi );
for p  in fix  do
  q := p ^ g;
  where := IsolatePoint( Pi, q );
  if where <> false  then
    Add( fix, q );
    ProcessFixpoint( R, q );
    AddRefinement( R, "Centralizer", [ Pi.cellno[ p ], q, where ] );
    if Pi.lengths[ where ] = 1  then
      p := FixpointCellNo( Pi, where );
      ProcessFixpoint( R, p );
      AddRefinement( R, "ProcessFixpoint", [ p, where ] );
    fi;
  fi;
od;
end;

return PartitionBacktrack(
  G,
  c -> g ^ c = g,
  false,
  R,
  [ Pi_0, g ],
  L, R );

The list numbers below refer to the line numbers of the code above.

1.

omega is the set on which G acts and Pi_0 is the first member of the decreasing sequence of partitions mentioned in 43.12. We set Pi_0 = omega, which is constructed as TrivialPartition( omega ), but we could have started with a finer partition, e.g., into unions of g-cycles of the same length.

2.

This statement sets up the R-base in the variable R.

3.-21.

These lines define a function R.nextLevel which is called whenever an additional member in the sequence Pi_0 \(\geq \Pi_1 \geq \ldots\) of partitions is needed. If \(\Pi_i\) does not yet contain enough base points in one-point cells, GAP will call R.nextLevel( \(\Pi_i,\) R ), and this function will choose a new base point \(a_{{i+1}}\), refine \(\Pi_i\) to \(\Pi_{{i+1}}\) (thereby changing the first argument) and store all necessary information in R.

5.

This statement selects a new base point \(a_{{i+1}}\), which is not yet in a one-point cell of \(\Pi\) and still moved by the stabilizer \(G_{{a_1 \ldots a_i}}\) of the earlier base points. If certain points of omega should be preferred as base point (e.g., because they belong to long cycles of g), a list of points starting with the most wanted ones, can be given as an optional third argument to NextRBasePoint (actually, this is done in the real code for Centralizer (35.4-4)).

6.

Fixcells( \(\Pi\) ) returns the list of points in one-point cells of \(\Pi\) (ordered as the cells are ordered in \(\Pi\)).

7.

For every point \(p \in fix\), if we know the image \(p\)^\(g\) under \(c \in C_G(e)\), we also know \(( p\)^\(g )\)^\(c = ( p\)^\(c )\)^\(g\). We therefore want to isolate these extra points in \(\Pi\).

9.

This statement puts point \(q\) in a cell of its own, returning in where the number of the cell of \(\Pi\) from which \(q\) was taken. If \(q\) was already the only point in its cell, where = false instead.

12.

This command does the necessary bookkeeping for the extra base point \(q\): It prescribes \(q\) as next base in the stabilizer chain for \(G\) (needed, e.g., in line 5) and returns false if \(q\) was already fixed the stabilizer of the earlier base points (and true otherwise; this is not used here). Another call to ProcessFixpoint like this was implicitly made by the function NextRBasePoint to register the chosen base point. By contrast, the point \(q\) was not chosen this way, so ProcessFixpoint must be called explicitly for \(q\).

13.

This statement registers the function which will be used during the backtrack search to perform the corresponding refinements on the image partition \(\Sigma_i\) (to yield the refined \(\Sigma_{{i+1}}\)). After choosing an image \(b_{{i+1}}\) for the base point \(a_{{i+1}}\), GAP will compute \(\Sigma_i \wedge (\{ b_{{i+1}} \}, \Omega \setminus \{ b_{{i+1}} \})\) and store this partition in \(I\).partition, where \(I\) is a black box similar to \(R\), but corresponding to the current image partition (hence it is an R-image in analogy to the R-base). Then GAP will call the function Refinements.Centralizer( R, I, Pi.cellno[ p ], p, where ), with the then current values of \(R\) and \(I\), but where \(\Pi\).cellno\([ p ]\), \(p\), where still have the values they have at the time of this AddRefinement command. This function call will further refine \(I\).partition to yield \(\Sigma_{{i+1}}\) as it is programmed in the function Refinements.Centralizer, which is described below. (The global variable Refinements is a record which contains all refinement functions for all backtracking procedures.)

14.-19.

If the cell from which \(q\) was taken out had only two points, we now have an additional one-point cell. This condition is checked in line 13 and if it is true, this extra fixpoint \(p\) is taken (line 15), processed like \(q\) before (line 16) and is then (line 17) passed to another refinement function Refinements.ProcessFixpoint( R, I, p, where ), which is also described below.

23.-29.

This command starts the backtrack search. Its result will be the centralizer as a subgroup of \(G\). Its arguments are

24.

the group we want to run through,

25.

the property we want to test, as a GAP function,

26.

false if we are looking for a subgroup, true in the case of a representative search (when the result would be one representative),

27.

the R-base,

28.

a list of data, to be stored in \(I\).data, which has in position 1 the first member \(\Sigma_0\) of the decreasing sequence of image partitions mentioned in 43.12. In the centralizer example, position 2 contains the element that is to be centralized. In the case of a representative search, i.e., a conjugacy test \(g\)^\(c\) ?= \(h\), we would have \(h\) instead of \(g\) here, and possibly a \(\Sigma_0\) different from \(\Pi_0\) (e.g., a partition into unions of \(h\)-cycles of same length).

29.

two subgroups \(L \leq C_G(g)\) and \(R \leq C_G(h)\) known in advance (we have \(L = R\) in the centralizer case).

87.2-3 Refinement functions for the backtrack search

The last subsection showed how the refinement process leading from \(\Pi_i\) to \(\Pi_{{i+1}}\) is coded in the function \(R\).nextLevel, this has to be executed once the base point \(a_{{i+1}}\). The analogous refinement step from \(\Sigma_i\) to \(\Sigma_{{i+1}}\) must be performed for each choice of an image \(b_{{i+1}}\) for \(a_{{i+1}}\), and it will depend on the corresponding value of \(\Sigma_i \wedge (\{b_{{i+1}}\}, \Omega \setminus \{b_{{i+1}}\})\). But before we can continue our centralizer example, we must, for the interested reader, document the record components of the other black box \(I\), as we did above for the R-base black box \(R\). Most of the components change as GAP walks up and down the levels of the search tree.

data

this will be mentioned below

depth

the level \(i\) in the search tree of the current node \(\Sigma_i\)

bimg

a list of images of the points in \(R\).base

partition

the partition \(\Sigma_i\) of the current node

level

the stabilizer chain \(R\).lev\([i]\) at the current level

perm

a permutation mapping Fixcells\(( \Pi_i )\) to Fixcells\(( \Sigma_i )\); this implies mapping \((a_1, \ldots, a_i)\) to \((b_1, \ldots, b_i)\)

level2, perm2

a similar construction for the second stabilizer chain, false otherwise (and true if \(R\).level2 = true)

As declared in the above code for Centralizer (35.4-4), the refinement is performed by the function Refinement.Centralizer\(( R, I, \Pi\).cellno\([p], p, where )\). The functions in the record Refinement always take two additional arguments before the ones specified in the AddRefinement call (in line 13 above), namely the R-base \(R\) and the current value \(I\) of the R-image. In our example, \(p\) is a fixpoint of \(\Pi = \Pi_i \wedge (\{ a_{{i+1}} \}, \Omega \setminus \{ a_{{i+1}} \})\) such that \(where = \Pi\).cellno\([ p^g ]\). The Refinement functions must return false if the refinement is unsuccessful (e.g., because it leads to \(\Sigma_{{i+1}}\) having different cell sizes from \(\Pi_{{i+1}}\)) and true otherwise. Our particular function looks like this.

Refinements.Centralizer := function( R, I, cellno, p, where )
local  Sigma, q;
Sigma := I.partition;
q := FixpointCellNo( Sigma, cellno ) ^ I.data[ 2 ];
return IsolatePoint( Sigma, q ) = where and ProcessFixpoint( I, p, q );
end;

The list numbers below refer to the line numbers of the code immediately above.

3.

The current value of \(\Sigma_i \wedge (\{ b_{{i+1}} \}, \Omega \setminus \{ b_{{i+1}} \})\) is always found in \(I\).partition.

4.

The image of the only point in cell number \(cellno = \Pi_i\).cellno\([ p ]\) in \(\Sigma\) under \(g = I\).data\([ 2 ]\) is calculated.

5.

The function returns true only if the image \(q\) has the same cell number in \(\Sigma\) as \(p\) had in \(\Pi\) (i.e., \(where\)) and if \(q\) can be prescribed as an image for \(p\) under the coset of the stabilizer \(G_{{a_1 \ldots a_{{i+1}}}}.c\) where \(c \in G\) is an (already constructed) element mapping the earlier base points \(a_1, \ldots, a_{{i+1}}\) to the already chosen images \(b_1, \ldots, b_{{i+1}}\). This latter condition is tested by ProcessFixpoint\(( I, p, q )\) which, if successful, also does the necessary bookkeeping in \(I\). In analogy to the remark about line 12 in the program above, the chosen image \(b_{{i+1}}\) for the base point \(a_{{i+1}}\) has already been processed implicitly by the function PartitionBacktrack, and this processing includes the construction of an element \(c \in G\) which maps Fixcells\(( \Pi_i )\) to Fixcells\(( \Sigma_i )\) and \(a_{{i+1}}\) to \(b_{{i+1}}\). By contrast, the extra fixpoints \(p\) and \(q\) in \(\Pi_{{i+1}}\) and \(\Sigma_{{i+1}}\) were not chosen automatically, so they require an explicit call of ProcessFixpoint, which replaces the element \(c\) by some \(c'.c\) (with \(c' \in G_{{a_1 \ldots a_{{i+1}}}}\)) which in addition maps \(p\) to \(q\), or returns false if this is impossible.

You should now be able to guess what Refinements.ProcessFixpoint\(( R, I, p, where )\) does: it simply returns ProcessFixpoint\(( I, p, \)FixpointCellNo\(( I\).partition\(, where ) )\).

Summary.

When you write your own backtrack functions using the partition technique, you have to supply an R-base, including a component nextLevel, and the functions in the Refinements record which you need. Then you can start the backtrack by passing the R-base and the additional data (for the data component of the R-image) to PartitionBacktrack.

87.2-4 Functions for meeting ordered partitions

A kind of refinement that occurs in particular in the normalizer calculation involves computing the meet of \(\Pi\) (cf. lines 6ff. above) with an arbitrary other partition \(\Lambda\), not just with one point. To do this efficiently, GAP uses the following two functions.

StratMeetPartition( \(R\), \(\Pi\), \(\Lambda\) [, \(g\) ] )

MeetPartitionStrat( \(R\), \(I\){, \(\Lambda'\)}[, {\(g'\)}], \(strat\) )

Such a StratMeetPartition command would typically appear in the function call \(R\).nextLevel\(( \Pi, R )\) (during the refinement of \(\Pi_i\) to \(\Pi_{{i+1}}\)). This command replaces \(\Pi\) by \(\Pi \wedge \Lambda\) (thereby changing the second argument) and returns a meet strategy \(strat\). This is (for us) a black box which serves two purposes: First, it allows GAP to calculate faster the corresponding meet \(\Sigma \wedge \Lambda'\), which must then appear in a Refinements function (during the refinement of \(\Sigma_i\) to \(\Sigma_{{i+1}}\)). It is faster to compute \(\Sigma \wedge \Lambda'\) with the meet strategy of \(\Pi \wedge \Lambda\) because if the refinement of \(\Sigma\) is successful at all, the intersection of a cell from the left hand side of the \(\wedge\) sign with a cell from the right hand side must have the same size in both cases (and \(strat\) records these sizes, so that only non-empty intersections must be calculated for \(\Sigma \wedge \Lambda'\)). Second, if there is a discrepancy between the behaviour prescribed by \(strat\) and the behaviour observed when refining \(\Sigma\), the refinement can immediately be abandoned.

On the other hand, if you only want to meet a partition \(\Pi\) with \(\Lambda\) for a one-time use, without recording a strategy, you can simply type StratMeetPartition\(( \Pi, \Lambda )\) as in the following example, which also demonstrates some other partition-related commands.

gap> P := Partition( [[1,2],[3,4,5],[6]] );;  Cells( P );
[ [ 1, 2 ], [ 3, 4, 5 ], [ 6 ] ]
gap> Q := Partition( OnTuplesTuples( last, (1,3,6) ) );;  Cells( Q );
[ [ 3, 2 ], [ 6, 4, 5 ], [ 1 ] ]
gap> StratMeetPartition( P, Q );
[  ]
gap> # The ``meet strategy'' was not recorded, ignore this result.
gap> Cells( P );
[ [ 1 ], [ 5, 4 ], [ 6 ], [ 2 ], [ 3 ] ]

You can even say StratMeetPartition\(( \Pi, \Delta )\) where \(\Delta\) is simply a subset of \(\Omega\), it will then be interpreted as the partition \((\Delta, \Omega \setminus \Delta)\).

GAP makes use of the advantages of a meet strategy if the refinement function in Refinements contains a MeetPartitionStrat command where \(strat\) is the meet strategy calculated by StratMeetPartition before. Such a command replaces \(I\).partition by its meet with \(\Lambda'\), again changing the argument \(I\). The necessary reversal of these changes when backtracking from a node (and prescribing the next possible image for a base point) is automatically done by the function PartitionBacktrack.

In all cases, an additional argument \(g\) means that the meet is to be taken not with \(\Lambda\), but instead with \(\Lambda.{{g^{{-1}}}}\), where operation on ordered partitions is meant cellwise (and setwise on each cell). (Analogously for the primed arguments.)

gap> P := Partition( [[1,2],[3,4,5],[6]] );;
gap> StratMeetPartition( P, P, (1,6,3) );;  Cells( P );
[ [ 1 ], [ 5, 4 ], [ 6 ], [ 2 ], [ 3 ] ]

Note that \(P.(1,3,6) = Q\).

87.3 Stabilizer Chains for Automorphisms Acting on Enumerators

This section describes a way of representing the automorphism group of a group as permutation group, following [Sim97]. The code however is not yet included in the GAP library.

In this section we present an example in which objects we already know (namely, automorphisms of solvable groups) are equipped with the permutation-like operations ^ and / for action on positive integers. To achieve this, we must define a new type of objects which behave like permutations but are represented as automorphisms acting on an enumerator. Our goal is to generalize the Schreier-Sims algorithm for construction of a stabilizer chain to groups of such new automorphisms.

87.3-1 An operation domain for automorphisms

The idea we describe here is due to C. Sims. We consider a group \(A\) of automorphisms of a group \(G\), given by generators, and we would like to know its order. Of course we could follow the strategy of the Schreier-Sims algorithm (described in 43.6) for \(A\) acting on \(G\). This would involve a call of StabChainStrong( EmptyStabChain( [], One( A ) ), GroupGenerators( A ) ) where StabChainStrong is a function as the one described in the pseudo-code below:

StabChainStrong := function( S, newgens )
  Extend the Schreier tree of S with newgens.
  for sch  in  Schreier generators  do
    if not sch in S.stabilizer  then
      StabChainStrong( S.stabilizer, [ sch ] );
    fi;
  od;
end;

The membership test \(sch \notin S\).stabilizer can be performed because the stabilizer chain of \(S\).stabilizer is already correct at that moment. We even know a base in advance, namely any generating set for \(G\). Fix such a generating set \((g_1, \ldots, g_d)\) and observe that this base is generally very short compared to the degree \(|G|\) of the operation. The problem with the Schreier-Sims algorithm, however, is then that the length of the first basic orbit \(g_1.A\) would already have the magnitude of \(|G|\), and the basic orbits at deeper levels would not be much shorter. For the advantage of a short base we pay the high price of long basic orbits, since the product of the (few) basic orbit lengths must equal \(|A|\). Such long orbits make the Schreier-Sims algorithm infeasible, so we have to look for a longer base with shorter basic orbits.

Assume that \(G\) is solvable and choose a characteristic series with elementary abelian factors. For the sake of simplicity we assume that \(N < G\) is an elementary abelian characteristic subgroup with elementary abelian factor group \(G/N\). Since \(N\) is characteristic, \(A\) also acts as a group of automorphisms on the factor group \(G/N\), but of course not necessarily faithfully. To retain a faithful action, we let \(A\) act on the disjoint union \(G/N\) with \(G\), and choose as base \((g_1 N, \ldots, g_d N, g_1, \ldots, g_d)\). Now the first \(d\) basic orbits lie inside \(G/N\) and can have length at most \([G:N]\). Since the base points \(g_1 N, \ldots, g_d N\) form a generating set for \(G/N\), their iterated stabilizer \(A^{(d+1)}\) acts trivially on the factor group \(G/N\), i.e., it leaves the cosets \(g_i N\) invariant. Accordingly, the next \(d\) basic orbits lie inside \(g_i N\) (for \(i = 1, \ldots, d\)) and can have length at most \(|N|\).

Generalizing this method to a characteristic series \(G = N_0 > N_1 > \ldots > N_l = \{ 1 \}\) of length \(l > 2\), we can always find a base of length \(l.d\) such that each basic orbit is contained in a coset of a characteristic factor, i.e. in a set of the form \(g_i N_{{j-1}} / N_j\) (where \(g_i\) is one of the generators of \(G\) and \(1 \leq j \leq l\)). In particular, the length of the basic orbits is bounded by the size of the corresponding characteristic factors. To implement a Schreier-Sims algorithm for such a base, we must be able to let automorphisms act on cosets of characteristic factors \(g_i N_{{j-1}} / N_j\), for varying \(i\) and \(j\). We would like to translate each such action into an action on \(\{ 1, \ldots, [ N_{{j-1}}:N_j] \}\), because then we need not enumerate the operation domain, which is the disjoint union of \(G / N_1\), \(G / N_2 \ldots G / N_l\), as a whole. Enumerating it as a whole would result in basic orbits like orbit\( \subseteq \{ 1001, \ldots, 1100 \}\) with a transversal list whose first 1000 entries would be unbound, but still require 4 bytes of memory each (see 43.9).

Identifying each coset \(g_i N_{{j-1}} / N_j\) into \(\{ 1, \ldots, [N_{{j-1}}:N_j] \}\) of course means that we have to change the action of the automorphisms on every level of the stabilizer chain. Such flexibility is not possible with permutations because their effect on positive integers is hardwired into them, but we can install new operations for automorphisms.

87.3-2 Enumerators for cosets of characteristic factors

So far we have not used the fact that the characteristic factors are elementary abelian, but we will do so from here on. Our first task is to implement an enumerator (see AsList (30.3-8) and 21.23) for a coset of a characteristic factor in a solvable group \(G\). We assume that such a coset \(g N/M\) is given by

(1)

a pcgs for the group \(G\) (see Pcgs (45.2-1)), let \(n = \)Length( \(pcgs\) );

(2)

a range \(range = [ start .. stop ]\) indicating that \(N = \langle pcgs\{ [ start .. n ] \} \rangle\) and \(M = \langle pcgs\{ [ stop + 1 .. n ] \} \rangle\), i.e., the cosets of \(pcgs\{ range \}\) form a base for the vector space \(N/M\);

(3)

the representative \(g\).

We first define a new representation for such enumerators and then construct them by simply putting these three pieces of data into a record object. The enumerator should behave as a list of group elements (representing cosets modulo \(M\)), consequently, its family will be the family of the \(pcgs\) itself.

DeclareRepresentation( "IsCosetSolvableFactorEnumeratorRep", IsEnumerator,
    [ "pcgs", "range", "representative" ] );

EnumeratorCosetSolvableFactor := function( pcgs, range, g )
    return Objectify( NewType( FamilyObj( pcgs ),
                   IsCosetSolvableFactorEnumeratorRep ),
                   rec( pcgs := pcgs,
                       range := range,
              representative := g ) );
end;

The definition of the operations Length (21.17-5), \[\] (21.2-1) and Position (21.16-1) is now straightforward. The code has sometimes been abbreviated and is meant cum grano salis, e.g., the declaration of the local variables has been left out.

InstallMethod( Length, [ IsCosetSolvableFactorEnumeratorRep ],
    enum -> Product( RelativeOrdersPcgs( enum!.pcgs ){ enum!.range } ) );

InstallMethod( \[\], [ IsCosetSolvableFactorEnumeratorRep,
        IsPosRat and IsInt ],
    function( enum, pos )
    elm := ();
    pos := pos - 1;
    for i  in Reversed( enum!.range )  do
        p := RelativeOrderOfPcElement( enum!.pcgs, i );
        elm := enum!.pcgs[ i ] ^ ( pos mod p ) * elm;
        pos := QuoInt( pos, p );
    od;
    return enum!.representative * elm;
end );

InstallMethod( Position, [ IsCosetSolvableFactorEnumeratorRep,
        IsObject, IsZeroCyc ],
    function( enum, elm, zero )
    exp := ExponentsOfPcElement( enum!.pcgs,
                   LeftQuotient( enum!.representative, elm ) );
    pos := 0;
    for i  in enum!.range  do
        pos := pos * RelativeOrderOfPcElement( pcgs, i ) + exp[ i ];
    od;
    return pos + 1;
end );

87.3-3 Making automorphisms act on such enumerators

Our next task is to make automorphisms of the solvable group \(pcgs\)!.group act on \([ 1 .. \)Length\(( enum ) ]\) for such an enumerator \(enum\). We achieve this by introducing a new representation of automorphisms on enumerators and by putting the enumerator together with the automorphism into an object which behaves like a permutation. Turning an ordinary automorphism into such a special automorphism requires then the construction of a new object which has the new type. We provide an operation PermOnEnumerator( model, aut ) which constructs such a new object having the same type as model, but representing the automorphism aut. So aut can be either an ordinary automorphism or one which already has an enumerator in its type, but perhaps different from the one we want (i.e. from the one in model).

DeclareCategory( "IsPermOnEnumerator",
    IsMultiplicativeElementWithInverse and IsPerm );

DeclareRepresentation( "IsPermOnEnumeratorDefaultRep",
    IsPermOnEnumerator and IsAttributeStoringRep,
    [ "perm" ] );

DeclareOperation( "PermOnEnumerator",
    [ IsEnumerator, IsObject ] );

InstallMethod( PermOnEnumerator,
    [ IsEnumerator, IsObject ],
    function( enum, a )
    SetFilterObj( a, IsMultiplicativeElementWithInverse );
    a := Objectify( NewKind( PermutationsOnEnumeratorsFamily,
                 IsPermOnEnumeratorDefaultRep ),
                 rec( perm := a ) );
    SetEnumerator( a, enum );
    return a;
end );

InstallMethod( PermOnEnumerator,
    [ IsEnumerator, IsPermOnEnumeratorDefaultRep ],
    function( enum, a )
    a := Objectify( TypeObj( a ), rec( perm := a!.perm ) );
    SetEnumerator( a, enum );
    return a;
end );

Next we have to install new methods for the operations which calculate the product of two automorphisms, because this product must again have the right type. We also have to write a function which uses the enumerators to apply such an automorphism to positive integers.

InstallMethod( \*, IsIdenticalObj,
    [ IsPermOnEnumeratorDefaultRep, IsPermOnEnumeratorDefaultRep ],
    function( a, b )
    perm := a!.perm * b!.perm;
    SetIsBijective( perm, true );
    return PermOnEnumerator( Enumerator( a ), perm );
end );

InstallMethod( \^,
    [ IsPosRat and IsInt, IsPermOnEnumeratorDefaultRep ],
    function( p, a )
    return PositionCanonical( Enumerator( a ),
                   Enumerator( a )[ p ] ^ a!.perm );
end );

How the corresponding methods for p / aut and aut ^ n look like is obvious.

Now we can formulate the recursive procedure StabChainStrong which extends the stabilizer chain by adding in new generators \(newgens\). We content ourselves again with pseudo-code, emphasizing only the lines which set the EnumeratorDomainPermutation. We assume that initially \(S\) is a stabilizer chain for the trivial subgroup with a level for each pair \((range,g)\) characterizing an enumerator (as described above). We also assume that the identity element at each level already has the type corresponding to that level.

StabChainStrong := function( S, newgens )
  for i  in [ 1 .. Length( newgens ) ]  do
    newgens[ i ] := AutomorphismOnEnumerator( S.identity, newgens[ i ] );
  od;
  Extend the Schreier tree of S with newgens.
  for sch  in  Schreier generators  do
    if not sch in S.stabilizer  then
      StabChainStrong( S.stabilizer, [ sch ] );
    fi;
  od;
end;

generated by GAPDoc2HTML